| Menu |
| Home |
| Bore Pumps |
| Bore Pumps |
| Submersible Pumps |
| Convertible Jet Pumps |
| Single Phase Pumps |
| Three Phase Pumps |
| Bore Pump Control Box |
| Bore Pump Switch |
| Sewage Pumps |
| Septic Tank Pumps |
| Greywater Pumps |
| Pressure Pumps |
| Pressure Pumps |
| Rainwater Tank Pumps |
| Automatic Pump Control |
| Other Pumps |
| Pool Pump |
| Centrifugal Pump |
| Peripheral Pump |
| Garden Pump |
| Accessories |
| Bore Pump Control Box |
| Bore Pump Switch |
| Pressure Pump Controller |
| I pay for delivery | ||
 |
||
Stainless Steel Single Phase Bore Pumps
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
Pump Specification;
These figures are the pumps rated performance. They usually perform around 25% better. If less water is needed, the water supply can be tapered back by a tap fitted at the top of the bore. This model replaces the Grundfos SP3A-9 borehole pump |
Control Switch included
Control Box Optional Designed for Deep Well Submersible single phase power pumps.
|
||||||||||||||||||||||||||||
This pump is suitable for a 4 " 100mm bore casing. It can also be used with a 6 " 150mm bore casing. If it is to be used in a 6 " bore casing, it is recommended that you shroud the pump. This helps keep the motor cool. No Pollution, corrosion resistant,
Stainless Steel construction inside
and out.
The built-in jam free stainless steel check
valve can effectively prevent backflow of
water in the pipe from effecting the
pump’s performance when the motor
is not operating.
Precision stainless steel intermediate
chamber can help maintain optimum
performance even when water pressure
is greatest.
The high-performance, high efficiency
stainless steel impeller is one of the
special features of this product. It is
incomparably superior to ordinary
plastic or brass impellers in terms of
abrasion resistance and service life.
The stainless steel deep well submersible pump is a superior product, made with the latest technology and materials from the 21st Century.
|
|
|||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||
Need less water flow? |
 |
|||||||||||||||||||||||||||||
| Bore pumps can be throttled back by assembling a tap at the top of the bore. With a 0.75 hp or 1 hp bore pump, you can use this tap to reduce the flow right back to less than 0.8 Lps if required. However, if you do need to tapper back the flow of water to this amount, you would need to shroud the pump. | ||||||||||||||||||||||||||||||
What size submersible cable do I need?If you would like to buy cable with your bore pump please let me know by clicking here |
|
|||||||||||||||||||||||||||||
