The presscontrol is an excellent option for all household pressure systems. It allows the pump to run at a constant flow. The controller stops rapid cycling of your pump unit, eliminating water fluctuating through your home.

The Electronic Controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the system. The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pumps operation.

WARNING: These units all contain circuit boards and areas with fluctuating power supply or use with generator power is not recommended as it will burn out the circuit board.

PA-GP-PC2

The Presscontrol is an excellent option for all household pressure systems. It allows the pump to run at a constant flow for flows of water appove approximately 1 lpm. The controller stops rapid cycling of your pump unit, eliminating water fluctuating through your home. The controller will stop the pump from running when there is a loss of water supply which prevents the pump from running dry and causing damage.

Voltage:	240V / 50Hz
Maximum Current:	10 Amp
Max Power:	1.1kw
Maximum working Pressure:	10 Bar
Connection:	1" / 25mm
Price $110 With leads

HYSK109-B

Functions

Start and stop the pump automatically
Protect the pump from damage caused by dry running
Adjustable pressure setting range: 1.0 to 2.2 bar

Voltage:	240V / 50Hz
Maximum Current:	10 Amp
Max Power:	1.5kw
Starting Pressure:	1.5 Bar
Maximum working Pressure:	10 Bar
Connection:	1" / 25mm
Protection Rating:	IP 65
Maximum Temperature Rating:	60°C
Manual Start Switch	RESET
Tension LED	POWER
Pump Working LED	ON
Security System LED	FAILURE
Special Non Return Valve to avoid surges
Security System removing the possibility of the machine working without water
Price $95 without leads
Price $110 With leads

TCP-13B

Functions

Start and stop the pump automatically
Protect the pump from damage caused by dry running

Voltage:	240V / 50Hz
Maximum Current:	10 Amp
Starting Pressure:	2.2 Bar
Maximum working Pressure:	10 Bar
Connection:	1" / 25mm
Protection Rating:	IP 65
Maximum Temperature Rating:	60°C
Manual Start Switch	RESET
Tension LED	POWER
Pump Working LED	ON
Security System LED	FAILURE
Special Non Return Valve to avoid surges
Security System removing the possibility of the machine working without water
Price $100 With leads

HYSK109A
Max Power 1.1kw

Functions

Start and stop the pump automatically
Protect the pump from damage caused by dry running

Voltage:	240V / 50Hz
Maximum Current:	10 Amp
Starting Pressure:	2.2 Bar
Maximum working Pressure:	10 Bar
Connection:	1" / 25mm
Protection Rating:	IP 65
Maximum Temperature Rating:	60°C
Manual Start Switch	RESET
Tension LED	POWER
Pump Working LED	ON
Security System LED	FAILURE
Special Non Return Valve to avoid surges
Security System removing the possibility of the machine working without water
Price $110 With leads

HYSK109A
Max Power 1.5kw

Functions

Start and stop the pump automatically
Protect the pump from damage caused by dry running

Voltage:	240V / 50Hz
Maximum Current:	10 Amp
Starting Pressure:	2.2 Bar
Maximum working Pressure:	10 Bar
Connection:	1" / 25mm
Protection Rating:	IP 65
Maximum Temperature Rating:	60°C
Manual Start Switch	RESET
Tension LED	POWER
Pump Working LED	ON
Security System LED	FAILURE
Special Non Return Valve to avoid surges
Security System removing the possibility of the machine working without water
Price $110 With leads

HYSK-102

Functions

Start and stop the pump automatically
Protect the pump from damage caused by dry running

Voltage:	240V / 50Hz
Maximum Current:	10 Amp
Max Power:	1.5kw
Starting Pressure:	1.5 Bar
Maximum working Pressure:	10 Bar
Connection:	1" / 25mm
Protection Rating:	IP 65
Maximum Temperature Rating:	60°C
Manual Start Switch	RESET
Tension LED	POWER
Pump Working LED	ON
Security System LED	FAILURE
Special Non Return Valve to avoid surges
Security System removing the possibility of the machine working without water
Price $95 Without leads

HYSK-102A

Functions

Start and stop the pump automatically
Protect the pump from damage caused by dry running
Examine the water automatically

Voltage:	240V / 50Hz
Maximum Current:	10 Amp
Max Power:	1.5kw
Starting Pressure:	1.5 Bar
Maximum working Pressure:	10 Bar
Connection:	1" / 25mm
Protection Rating:	IP 65
Maximum Temperature Rating:	60°C
Special Non Return Valve to avoid surges
Examines the water automatically: While the pump is in the absence of water, it will start the first exam after 3 mins, this will last 50 seconds. Then the unit will examine in the following 2nd to 12 th time every 30 mins and the exam time will last 50 seconds. The unit will emanine in the following 13th to 47th time in every 60 minutes, this exam time will last 50 seconds. The unit will stop in the 48th exam. During the exam process it last 41 hours.
State of the led lights: 1 - Red Led (state 1) lights up: Power up 2 - Green Led (state 2) lights up: The pump is off 3 - Red Led (state 1) and Green Led (state 2) flash alternately in slow speed: Pump is in operation 4 - Red Led (state 1) and Green Led (state 2) flash alternately in high speed: Pump Stops and is waiting to Start. 5 - Press the ON/OFF button for one second to start the unit...Press the ON/OFF buttom for 5 seconds to stop the unit.
Security System removing the possibility of the machine working without water
Price $95 Without leads
Price $110 With leads

Automatic pressure switch for the automatic pressure pump

Automatic Household Pressure Pump from PrimePpower

Domestic Household Pressure Pump with Automatic Pressure Control Switch

Rainwater tank pump with pressure switch

Delivery Australia Wide includes: NT, Northern Territory, Darwin, WA, Western Australia, Perth, SA, South Australia, Adelaide, Qld, Queensland, Brisbane, Cairns, NSW, New South Wales, Sydney, ACT, Australian Capital Territory, Canberra, Vic, Victoria, Melbourne, Tas, Tasmania, Hobart and all minor cities and towns.