“Very happy, prompt delivery no fuss” |
Pump & Motor Characteristics
|
Pumps are made of true 304 stainless steel and copper alloy
|
The inducer casing is modified by polycarbonate to strengthen its wear resistance
|
Italian BT Seals and Swedish SKF Thrust bearings
|
Delivery door and suction support is copper alloy
|
For more information on the pump and motor click here
|
Pump Dimensions:
A = 1392mm
B = 572mm
C = 880mm
D = 1"1/2
E = 95mm
Max = 100mm
| I pay for shipping | ||
 |
||
3 Hp / 2.2 Kw / 18 stage / 4 Inch Single Phase Bore Pump
|
|||||||||||||||||||||||||||||
 |
Single Phase Phase Submersible Stainless Steel Deep Water Bore Pumps Pump Specification;
These figures are the pumps rated performance. They usually perform around 25% better. If less water is needed, the water supply can be tapered back by a tap fitted at the top of the bore. Purchase BF-18 Single Phase Submersible Bore Pump with the Control Starter Box
To ensure that your pump goes to the correct address, please make sure that your postal details are correct and up to date on your paypal account For Direct Debit, Money Order, Bank Cheque or Cash payments please contact me
|
Control Box included Designed for Deep Well Submersible 3 phase power bore pumps. Do not need any adjustments to control water level. Water level control pole (total 6 poles provided) lines are controlled by three lines, three poles as traditional same kind products. Manual / Auto control switch. |
|||||||||||||||||||||||||||
This pump is suitable for a 6" 150mm bore casing. It can also be used with a 4" 100mm bore casing. If it is to be used in a 6 " bore casing, it is recommended that you shroud the pump. This helps keep the motor cool. This pump is best suited to bores varying from 50m deep to 124 m deep. Designed for domestic clean water use. This pump has radial or semi-axial impellers. The impellers and the diffusers are in plastic material (noryl), whereas the bearings are in ceramic / rubber lubricated by the water circulation. The check valve is incorporated in the delivery body with threaded outlet. The coupling pump motor is made to conform with NEMA regulations, it has ISO9000-2000 management certification and CCC, CE safety certification. The stainless steel deep well submersible pump is a superior product, made with the latest technology and materials from the 21st Century. The main part of the deep well submersible bore pump is made of stainless steel and copper alloy. The impeller is specially designed and restructured. The inducer casing is modified by polycarbonate to strengthen its wear resistance. The inducer in each level requires an independent silicone rubber shaft bearing. The motor consists of the liquid-immersed structure which requires a radial thrust bearing with a strong support force and is mechanically leak proof.
|
|
||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||
| Need less water flow? |  |
||||||||||||||||||||||||||||
| If less water is needed, the water flow can be throttled back by assembling a tap at the top of the bore. However, if you do need to reduce the flow by a considerable amount, you may need to shroud the pump. | |||||||||||||||||||||||||||||
What size submersible cable do I need?The pumps do not come with cable fitted. If you would like to buy cable with your bore pump please let me know by clicking here |
|
||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
