Submersible bore pumps - Single phase 1.5hp 1100watt single phase bore pumps Payments for your pump can be made by Paypal, Credit Card or Direct Debit

< back

You are here > Home > Bore Pumps > 1 Hp 3 ThreePhase Bore Pump

Telephone support
Contact Us

 

“Good Old-fashioned friendly service and advice”
-Mark (VIC)

 

 

Single phase 1.5hp submersible bore pump dimensions

Pump Dimensions:
L1 = 324
L = 674
DN = 1 1/2"
Max = 96mm

 

Search Query
Menu
Home
 
Bore Pumps
Bore Pumps
3" Submersible Pumps
4" Submersible Pumps
Submersible Motors
Solar Pumps
 
Sewage Pumps
Septic Tank Pumps
Greywater Pumps
 
Pressure Pumps
Pressure Pumps
Franklin Pressure Pumps
Rainwater Tank Pumps
Automatic Pump Control
Pressure Pump Accessories
Self-Priming Pressure Pumps
 
Other Pumps
Pool Pumps
Saltwater Pump
Peripheral Pump
Garden Pump
Convertible Jet Pump
Engine Drive Transfer Pumps
Fire Fighting Pumps
Generators / Gensets
 
Accessories
Bore Pump Accessories
Bore Pump Control Box
Bore Pump Switch
Pressure Pump Controller
Pressure Tanks
Variable Speed Pump Controller
Inline Constant Pressure System
 
Helpful Info
Installing a Bore Pump
Pump Direct from Bore to House

 

     
  I pay for shipping  
Free delivery of your pump anywhere in Australia

 

1 Hp / 0.75 Kw / 8 Stage / 4 Inch 3 ThreePhase Bore Pumps

 

Submersible 1.5Hp 1.1 kw 12 stage single phase deep bore water pump

 

 


 

3 Three Phase Submersible Water Bore Pump

Pump Specification;

  • Item Number: S4SP5-8
  • Suitable for 4" or 6" Bore Casing
  • Power Rating: 1HP / 0.75KW
  • Voltage: Three Phase 415V / 50Hz
  • Current: Only A (save money in cable)
  • Stainless Steel Housing (true 304 Stainless Steel)
  • Max Submergence 30m
  • Water Flow (158,000L/day)
  • Max Delivery Capacity 6600L/H in (14M heap)
  • Outlet: 40mm / 1.5 inch
Litres per minute Litres per second Depth of Bore or Well
0 lpm 0.00 lps 48m
10 lpm 0.16 lps 46m
20 lpm 0.33 lps 44m
30 lpm 0.50 lps 42m
40 lpm 0.66 lps 41m
50 lpm 0.83 lps 39m
60 lpm 1.00 lps

37m

70 lpm 1.16 lps 34m
80 lpm 1.33lps 30m
90 lpm 1.50 lps 25m
100 lpm 1.66 lps 20m
110 lpm 1.83 lps 14m

View Flow Chart

The water supply can be tapered back by a tap fitted at the top of the bore.

Purchase Pump with Automatic Control Box $750

 

 

.....Out of Stock.....

12 months Warranty

 

Single Phase Control Box

Comes standard with Control Box

 

 

This pump is suitable for a bore casing larger than 100mm in diameter as the pump diameter including the cable guard is 96mm. You would need to allow a few millimeters on either side of the pump for water to flow past the pump. It can also be used with a 5" or 6 " 150mm bore casing. If it is to be used in a 5 " or 6 " bore casing, it is recommended that you shroud the pump. This helps keep the motor cool. This pump is best suited to bores varying from 14m deep to 46 m deep. Designed for domestic clean water use.

The motors are built for dependable operation in 4" inch or larger water wells and bores continuing work in 30°C. Rotation direction: counter-clockwise facing to axis when single phase; motor reversal when 3 phase.

Motor Structure and Material:  
Components Standard Water Valve
Cover Cast Copper
Shell 304 SS
Fastener 304 SS
Sand Proof Cap Acetal
Seal Carborundum
Oil Chamber 304 SS

Basic Characteristics:

  • The bottom material and seal improve the ability of anti-corrosion in the harsh water environment
  • Anti-corrosion stainless steel shell
  • Stainless steel spline shaft
  • Hermetically sealed windings
  • Self-adjusting thrust oil-lubricated bearing
  • Pressure-equalling diaphragm
  • Removeable water block lead
  • NEMA mounting dimensions
  • Insulation Class B
  • Protection standard IP58
  • CE Certification


submersible motor

Need to reduce the water flow? A bore tap is used to reduce the flow of water that the bore pumps
If less water is needed, the water flow can be throttled back by assembling a tap at the top of the bore. However, if you do need to reduce the flow by a considerable amount, you may need to shroud the pump.
 

What size submersible cable do I need?

This chart is just a guide to help you get an idea of cable size. It is recommended that your local electrical supply outlet do your cable selection for you.

Cable length in meters from motor to control box Cable size
From 0 to 25 meters 4 wire x 1mm2
from 25m to 40m 4 wire x 1.5mm2
from 40m to 65m 4 wire x 2.5mm2
from 65m to 105m 4 wire x 4mm2
from 105m to 160m 4 wire x 6mm2
 

Demand feed from bore to house or garden without using a water tank

It is also possible to pump water directly to the garden / house without having to pump into a water tank.

For more information on pumping directly to the house or garden click here

Using a submersible bore pump to pump on demand from the bore or well to the house and garden
 
 
Delivery Australia Wide includes: NT, Northern Territory, Darwin, WA, Western Australia, Perth, SA, South Australia, Adelaide, Qld, Queensland, Brisbane, Cairns, NSW, New South Wales, Sydney, ACT, Australian Capital Territory, Canberra, Vic, Victoria, Melbourne, Tas, Tasmania, Hobart and all minor cities and towns.